Zhongguan Valve is a professional manufacturer and supplier in China. Our factory provides gate valve, flange butterfly valve, PVC butterfly valve, etc. If you are interested in our products, you can inquire now, and we will get back to you promptly.
JIS 5k Or 10k Brass Seal Gate Valve is very popular in Southeast Asian countries, and they will use this product in many different fields. Japanese standard specifications: comply with Japanese industrial standards such as JIS B2032 (gate valve standard) and JIS B2071 (flange end gate valve). Pressure rating: 10K: suitable for PN16 (approximately 1.6MPa) pressure. 15K: Suitable for PN25 (approximately 2.5MPa) pressure.
Caliber range: usually DN15~DN600 (1/2 "~24"), depending on the manufacturer's production range.
Rising Stem Design Resilient Seat Gate Valve is a common type of valve widely used in pipeline systems for media such as water, steam, and oil. It has the characteristics of good sealing, intuitive operation, and easy maintenance. At the same time, the Rising Stem Design Resilient Seat Gate Valve is an industrial valve, and the opening and closing component of the soft seal gate valve is the gate plate. The direction of movement of the gate plate is perpendicular to the direction of the fluid, and the gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled.
BS5163 Standard Resilient Seat Gate Valve is BS 5163 in the British Standard Resilient Seated Gate Valve is a specification for resilient seated gate valves in the British Standard, applicable to water supply, drainage, and other general industrial systems。The gate valve has two sealing surfaces, and the most commonly used mode gate valve has two sealing surfaces that form a wedge shape. The wedge angle varies with the valve parameters, usually 50 degrees, and when the medium temperature is not high, it is 2 ° 52 '' ''. The gate of a wedge gate valve can be made as a whole, called a rigid gate; It can also be made into a gate that can produce slight deformation to improve its process ability and compensate for the deviation of the sealing surface angle during the processing.
The Stainless Steel V-port Ball Valve with a V-shaped port on one side of the hemispherical spool, which is used to adjust the flow rate by adjusting the opening of the spool and changing the cross-sectional area of the medium flow. You can rest assured to purchase from our zhongguan factory, and we look forward to cooperating with you.
Zhongguan Valve not only specializes in producing butterfly valves, but we are also enthusiastic about developing new products, such as PVC material ball valves. PVC material ball valve is a valve mainly made of polyvinyl chloride (PVC), widely used in fluid control in water treatment, chemical industry, irrigation and other fields
Cast Iron Flange Type Ball Valve is a high-performance ball valve ,which is made of cast iron material and is widely used in water treatment, heating, petrochemical, HVAC and other fields. Zhongguan Valve produce The valve meets international flange standards, has good strength and corrosion resistance, and is particularly suitable for low and medium pressure fluid control systems. The cast iron flange ball valve has reasonable design and excellent sealing performance, which can effectively avoid leakage problems and ensure the stability and safety of the fluid system. With its high cost performance and good service life, it has become the valve of choice for fluid control systems in many industries.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy