Language
Do you sometimes feel that ordinary valves are not easy to use? The seal is not tight enough? It is difficult to open and close? Or are you worried that it can't withstand high temperature and high pressure environment? Don't worry, today I will introduce to you a "powerful player" in the pipeline control industry-flange eccentric butterfly valve. It is not an ordinary butterfly valve, but a master with its own "eccentric" skills!
Imagine an ordinary butterfly valve, the valve plate (the disc of the switch) rotates around the center. And what about our eccentric butterfly valve? Its rotating shaft is cleverly "biased" a little bit. This design, although it is only moved a little bit, brings a lot of benefits:
The seal is reliable! This is its greatest skill! Because of the eccentric design, the valve plate does not "slap" on the sealing ring when closing, but is like "gently closing", using the principle of leverage, and it is tighter and tighter. This will cause much less wear on the sealing ring, and the sealing effect will be naturally long-lasting and tight, and there will be no leakage? Basically say goodbye! Especially suitable for those critical occasions that require "watertight".
Switching is more labor-saving! Without the friction of hard collision, it is of course much easier to operate. Whether it is a manual large wheel, or equipped with pneumatic or electric devices, it feels smoother, saving time and effort.
Withstand the toss! The eccentric structure makes it difficult for the seal ring to be directly washed by the medium, and usually adopts a more wear-resistant and high-temperature resistant metal seal ring (such as stainless steel). This means that it can be "as stable as Mount Tai" in high-temperature steam, hot water, and even some medium with particles, and its service life is very long.
Less maintenance worries! The structure is relatively better, the wear is less, and the frequency of repair and replacement of seals is naturally lower, which saves you a lot of trouble and cost for later maintenance.
What is "flange type"? It is a connection method, which is particularly reliable!
"Flange type" refers to the standard flange plate (that is, the large disc with a circle of bolt holes) at both ends of the valve. This connection method is particularly common in industrial pipelines:
APPLICATION
In short, if you need:
A valve with excellent sealing performance and basically no leakage...
A valve that is stable and reliable under high temperature and high pressure...
A valve that is easy to open and close, durable, and easy to maintain...
And a valve that is connected with a standard flange and easy to install...
Then, this flange-type eccentric butterfly valve is definitely a "reliable partner" in your pipeline system!
Still having a headache about valve selection? Try it, maybe it's the answer you're looking for!
We provide a variety of specifications, pressure levels and materials (such as cast iron, ductile iron, carbon steel, stainless steel, etc.) to meet your different needs! Welcome to consult at any time~
-
