News

Gate valves are used for fluid on-off control in multiple fields and play a role in municipal and industrial scenarios. They have low flow resistance, good sealing, and are suitable for a variety of fluids. They are key equipment in pipeline systems.

While both floating and trunnion ball valves serve the same basic purpose—shutoff control—they differ significantly in structure, sealing mechanism, and application range.

The centerline butterfly valve is symmetrically designed, with the center axis of the valve plate coinciding with the axis of the pipeline. It achieves sealing by the compression deformation of the elastic valve seat (usually rubber).

Electric actuators utilize different methods for motion transmission. This text compares two distinct types: Threaded Drives and Three-Jaw Drives, highlighting key differences in operation, construction, and application.

Ball valves are everywhere—in your home, your workplace, and nearly every industrial plant or pipeline system you can think of. But unless you’re in the field, you might not realize how essential these simple-looking components really are. So what is a ball valve used for? That’s what this guide will break down clearly, with no jargon and no fluff.

A floating ball valve is a type of quarter-turn valve in which the ball is not physically fixed by a stem or shaft at both ends. Instead, it “floats” within the valve body, held in place only by the pressure of the valve seats.